Date:2015-12-14

48V E-bike BMS 13S Li-ion Battery Pack BMS for E-bike


Output Discharging Current: 24~ 30 A Continuous Output Discharging Current :≤25 A

1. Electrical Characteristic (Ta = 25 °C.)
1.1 Battery
Battery Gas: Li-ion
Battery Links:13S

1.2 Absolute Maximum Rating
Input Charging Voltage: 54.6 ±1% V
Input Charging Current: 2 ~8 A
Output Discharging Voltage :35.75 ~54.6V
Output Discharging Current: 24~ 30 A
Continuous Output Discharging Current :≤25 A

1.3Ambient Condition
Operating Temperature :-10 ~65 °C
Humidity (No Water-Drop): 0% RH

1.4 Storage
Temperature:-40~ 85 °C
Humidity (No Water-Drop) :0% RH

1.5 Protection Parameters (for Individual Cell).
Over-Charge Voltage Protection (OVP): 4.250 ± 0.25V
Over-Charge Voltage Protection Release (OVPR): 4.100 ±0.050 V
Over-Discharge Voltage Protection (UVP) 2.75 ±0.10 V
Over-Discharge Voltage Protection Release (UVPR) 3.00 ±0.10 V
Over-Current Charge Protection (OCCP) : 10 ±2.5 A
Over-Current Discharge Protection 0 Release: 32 S
Over-Current Discharge Protection (OCDP) : 60 A
Over-Current Protection Delay Time (OCPDT) : 24 mS
Over-Current Discharge Protection Release : 32 S
Short circuit current protection :200 A
Short circuit current protection delay time :246 uS
Short circuit protection Release Cut off load
Charging Temperature : -20 ~65 °C
Charging Temperature Protection Release: -10 ~45 °C
Discharging Temperature: -20 ~65 °C
Discharging Temperature Protection Release: -10~ 45 °C

1.6 Cell balance
Bleed Start Point: 3700 mV
Bleed Accuracy :20 mV
Bleed Current :70~ 90 mA
alance Mode: Charging

1.7 Current Consumption
Normal Mode : 2000uA
Idle mode: 360 uA