3S1P 18650 10.8V Li-ion Battery Pack 2600mAh Wires Out with Fuel Guage smBus

Built-in IC chip will prevent battery pack from over charge,over discharge, over current and prolong battery life, with SMbus


Item Specification
Model 3S1P/UR18650ZY
Nominal Capacity 2600mAh
Nominal Voltage 11.1V
Charging Voltage 4.2V
Charge Current 0.2C std.
0.5C rapid
Standrad Discharge Current 0.2C
Maximum Discharge Current 1.0C
End Voltage of Discharge 7.50V
Cycle Life >500cycles
Weight 148g max.
Size (max.) 69.0(L)*19.0(W)*54.0(H)mm
OEM Available

Made of 2pcs of Sanyo UR18650ZY 2600mAh cylindrical 18650 cell with PCB for full protection
Perfect for building 3.7V battery pack for bike lighting, RC toy (cars and airplanes), robots, cameras,  speakers, medical equipment and other portable devices.
Battery pack support System Management Bus (SMBus) protocol.
There is a distinct SMBus for each section. The following data can be available through SMBus.

State of charge
Battery temperature
Cell voltage
Current drawn from the cells
Failure messages
Charging status
Discharging status


New Products

OEM Lithium ion Battery Packs

Custom Battery Packs

Batteries for E-bike/E-scooter

Flashlight and Batteries

LED Flashlights

Protected 18650 Batteries

Other size batteries

Energy Storage Batteries

Battery Pack

Portable Power Supply

Lithium ion Cell-Power Type



26650 and other size

Lithium ion Cell-Energy Type




Vappower IMR Batteries

18650 Batteries

Other sizes



Protection Circuit Board

Battery Case